Strong Adhesion, Fewer FailuresThe SuperTack coating ensures excellent adhesion, even on uneven surfaces or large prints. This means fewer failed prints and a more consistent printing experience. If your heatbed is set too low and prints dont stick, simply increase the temperature to improve adhesion.Built to LastWith less than 20% adhesion loss af..

Consistent Power for AMS DryingThe adapter is essential when activating the drying function of the AMS 2 Pro. Without it, the unit may not reach or maintain the necessary temperature for effective drying, especially in multi-unit setups where additional power is needed.Works Across Bambu Lab Printer SeriesThis adapter is compatible with several Bam..

High-Temperature Drying for Advanced MaterialsThe AMS HT is designed to handle high-performance filaments that require elevated drying temperatures. With the ability to dry materials up to 85°C, it is ideal for filaments such as nylon and polycarbonate, which require special handling to ensure top-quality prints.Efficient Filament ManagementThe ele..

Overview The function of PTFE is to reduce resistance and guide filament. The tube's inner diameter is 2.5mm, and its outer diameter is 4mm. Compatibility X1 Series, P1P In the Box PTFE Tube - AMS Hub: 4m*1Доставка: 4-10 рабочих дней...

Two Textures (Textured and Smooth) in One PlateEnjoy the benefits of two different textures in one plate, one side is Textured PEI surface and the other side is Smooth PEI surface. This Plate features a 0.5mm magnetic stainless steel plate that enhances magnetic adhesion and helps to prevent warping and ensure optimal print quality during 3D printi..

The Front Housing Assembly is mainly used to cool the printed part so that the printed part can be shaped.Доставка: 4-10 рабочих дней...

Bambu PETG HF FilamentOptimized for Speed: Bambu PETG HF addresses common challenges such as oozing and clumping, resulting in smoother, more consistent prints with minimal adjustment needed. Its advanced formulation ensures precise details and a high-quality finish, even during rapid printing.Outdoor ReadyRetaining the strength of regular PETG, Ba..

Glow effect with creative potential PLA Glow contains luminous powder that absorbs light and makes your prints glow in the dark. After a few hours of exposure to sunlight or UV light, the material charges and emits a soft glow. It’s perfect for signs, decorations, night lamps, and creative models that stand out in the dark. Easy and reliable printi..

OverviewThe filament can be cut to prevent the supplies from clogging when using Bambu printers. When used with AMS, it assists with multi-material switching.Доставка: 4-10 рабочих дней...

 Доставка: 4-10 рабочих дней...

OverviewProlonging the lifetime of the build plate is to use a sharp scraper for releasing the model from the printing surface. After the plate has cooled down, gently slide the scraper underneath one of the corners of the model then carefully bend the sheet to remove the model.In the Box3x Bambu scraperДоставка: 4-10 рабочих дней...

OverviewThe Silicone Sock for Hotend is made from high-quality silicone for higher temperature resistance (rated to 300°C printing temperatures). Ensuring optimal thermal insulation and tear resistance, the silicone sock also provides the nozzle with long-lasting protection from cooling air and plastic adhesion.InstallationLearn more about the repl..

Overview The ceramic heater can heat the nozzle up to 300℃, which is for use with Bambu Lab complete hotend assemby only. *Please confirm your printer model before making a purchase, as the connector may differ between the X1 Series version and the P1P version. Installation Learn more about the replacement of ceramic heater on Bambu Lab W..

Overview The hardened steel extruder unit is equipped with double gears made of hardened steel, which provides increased extrusion force, prevents slippage, and enhances abrasion resistance. These gears enable the extruder unit to handle tough engineering filaments such as carbon fiber nylon and glass fiber nylon. In additi..