ASW-200 F is a smart plug that allows to remotely turn on and off connected devices. The smart plug is designed to work within a two-way wireless ABAX 2/ABAX/BeWave system...

Transformer 230 V/20 AC, 60 VA for OPU-3 P..

The module is designed for use in conjunction with the control panels of INTEGRA, INTEGRA Plus and VERSA families. This device replaces the CA-64 E module. The INT-E offers expansion of the system by 8 wired zones as well as allows direct connection of roller shutter and vibration detectors. The additional tamper input facilitates detection of unau..

DIN rail compatible zones and outputs expansion module •8 relay outputs for direct control of 230 V mains powered appliances •8 programmable zones •installation directly on 35mm DIN rail •optical indicators of relay state..

Addressable zone expansion module The module is designed for connecting addressable detectors to the control panels of INTEGRA and INTEGRA Plus families. This device replaces the CA-64 ADR module. The use of INT-ADR facilitates wiring, particularly where extensive systems are involved. The addressable detector bus is independent of the control pane..

An addressing module for converting traditional detectors for an alarm system equipped with a relay output into detectors connected to an addressable control panel. A small enclosure of the addressing module makes it possible to install it event in detectors equipped with small-sized enclosures. - converts standard (NO, NC) detector into addressabl..

Angular holder with tamper for ACTIVA barriers..

Adapter cable for connecting cellular module IPX connector to antenna SMA connector The IPX-SMA cable is used to connect the external antenna to the cellular communication module. It has female IPX and SMA connectors. As the adapter is 25 cm long, you can either place the antenna connector on the outside of the enclosure or easily install the a..

GSM antenna - GSM–4, GSM LT–1, GSM LT–2, GPRS–T1, GPRS–T2, GPRS–T4, GPRS–T6, INTEGRA 128–WRL modules..

Antenna for communication modules The ANT-LTE-O antenna is designed to operate with control panels and modules equipped with cellular communicators and a standard SMA connector...

The ZB-1 module is a safety device designed to protect battery from deep discharge that would significantly reduce its life. If a dangerously low voltage level is reached, the load is disconnected. The module is designed to work in conjunction with devices included in the alarm, access control or video systems whose power supply system does not hav..

- installed directly on wall/door frame - communication format: EM Marin - support for 125 kHz proximity cards/tags - optional CZ-EMM-POD spacer pad available..

A 125 kHz transponder reader (proximity cards and tags) facilitates implementation of access control functions by means of INTEGRA control panels and ACCO door controllers. The small-sized enclosure design refers, in terms of style, to INT-KLCD and INT-S devices ensuring visually coherent implementation of alarm and access control functions. - i..

- installed directly on wall/door frame - communication format: EM Marin - access authorization with proximity card - support for 125 kHz proximity cards/tags - outdoor operation..

Proximity card reader installed directly on wall/door frame communication format: EM Marin access authorization with proximity card support for 125 kHz proximity cards/tags doorbell button outdoor operation..