RS485 to USB interface •RS-485 ACCO system bus to PC USB connection •reader socket for ACCO-USB-CZ system management reader •powered by USB port •Plug&play installation..

Conventional mounting base for point fire detectors The mounting base for CSP system detectors facilitates the assembly and dismantling of the detectors without the need to disconnect cables. This greatly simplifies the implementation of periodical system maintenance procedures and required replacement of devices. •supports DMP-100, DRP-100 and DCP..

An adjustable motion detector holder for wall and ceiling mounting. Two adjustment stages ensure detector horizontal pivot and tilt adjustment. The holder conceals the wiring, which improves the overall appearance of an installation. - inner cable duct - fully enclosed design for better appearance of installation - tilt angle adjustment within appr..

BRACKET E-1 is part of the BRACKET E ceiling-and-wall mount distance holder. The body allows: mounting the BRACKET E-5 (GY) ball-joint holder mounting the BRACKET E-2A (GY) or BRACKET E-2B (GY) insert. BRACKET E-1 can be mounted directly on the BRACKET E-4 (GY) base or the BRACKET E-3 (GY) spacer...

BRACKET E-1 is part of the BRACKET E ceiling-and-wall mount distance holder. The body allows: mounting the BRACKET E-5 (GY) ball-joint holder mounting the BRACKET E-2A (GY) or BRACKET E-2B (GY) insert. BRACKET E-1 can be mounted directly on the BRACKET E-4 (GY) base or the BRACKET E-3 (GY) spacer...

BRACKET E-2A is part of the BRACKET E ceiling-and-wall mount distance holder. The insert allows mounting the AGATE/AOCD-260 devices: directly on flat surface on the BRACKET A / BRACKET B holder. The BRACKET E-6 tamper sensor is mounted on the insert. The BRACKET E-2A insert can be mounted on the BRACKET E-1 (GY) body...

BRACKET E-2A is part of the BRACKET E ceiling-and-wall mount distance holder. The insert allows mounting the AGATE/AOCD-260 devices: directly on flat surface on the BRACKET A / BRACKET B holder. The BRACKET E-6 tamper sensor is mounted on the insert. The BRACKET E-2A insert can be mounted on the BRACKET E-1 (GY) body...

BRACKET E-2B is part of the BRACKET E ceiling-and-wall mount distance holder. The insert allows installation of the OPAL (GY), OPAL Plus (GY), OPAL Pro (GY) and AOD-210 (GY) detectors, mounted on the BRACKET E-5 ball-joint holder. The BRACKET E-2B insert is mounted on the BRACKET E-1 (GY) body...

BRACKET E-2B is part of the BRACKET E ceiling-and-wall mount distance holder. The insert allows installation of the OPAL (GY), OPAL Plus (GY), OPAL Pro (GY) and AOD-210 (GY) detectors, mounted on the BRACKET E-5 ball-joint holder. The BRACKET E-2B insert is mounted on the BRACKET E-1 (GY) body...

BRACKET E-3 is part of the BRACKET E ceiling-and-wall mount distance holder. The spacer increases the detector distance from the wall or ceiling surface to avoid obstacles. The number of spacers used depends on the mounting location and the size of the obstacle in the detector coverage area. When using BRACKET E-3 elements, you must take into acc..

BRACKET E-3 is part of the BRACKET E ceiling-and-wall mount distance holder. The spacer increases the detector distance from the wall or ceiling surface to avoid obstacles. The number of spacers used depends on the mounting location and the size of the obstacle in the detector coverage area. When using BRACKET E-3 elements, you must take into acc..

BRACKET E-4 is part of the BRACKET E ceiling-and-wall mount distance holder. The base is used to mount the BRACKET E-1 (GY) body or the BRACKET E-3 (GY) spacer, or the BRACKET E-5 (GY) ball-joint holder. The BRACKET E-6 tamper sensor is mounted in the base...

BRACKET E-4 is part of the BRACKET E ceiling-and-wall mount distance holder. The base is used to mount the BRACKET E-1 (GY) body or the BRACKET E-3 (GY) spacer, or the BRACKET E-5 (GY) ball-joint holder. The BRACKET E-6 tamper sensor is mounted in the base...

BRACKET E-5 is part of the BRACKET E ceiling-and-wall mount distance holder. The element is intended for mounting the OPAL (GY), OPAL Plus (GY), OPAL Pro (GY) and AOD-210 (GY) detectors. The holder allows adjustment of the detector tilt angle in two planes: vertically up to 60° and horizontally up to 90°. This helps you find optimal position of t..

BRACKET E-5 is part of the BRACKET E ceiling-and-wall mount distance holder. The element is intended for mounting the OPAL (GY), OPAL Plus (GY), OPAL Pro (GY) and AOD-210 (GY) detectors. The holder allows adjustment of the detector tilt angle in two planes: vertically up to 60° and horizontally up to 90°. This helps you find optimal position of t..