KNX-SA24 module is an universal switch actuator, which makes it possible to control electrical devices (lighting, ventilation). The telegrams received from various KNX devices (e.g. sensors) are converted, via the module, into concrete actions, such as switching on/off light or fan. The KNX SA24 module has 8 relay outputs. Each of them corresponds..

The KNX-SA41 module is a universal switch actuator, which makes it possible to control electrical devices (lighting, ventilation). The telegrams received from various KNX devices (e.g. sensors) are converted, via the module, into concrete actions, such as switching on/off light or fan. The KNX-SA41 module has 4 relay outputs. Each of them correspo..

- adjustment and testing device for INDIGO detectors - simulates plate, laminated and temperature glass breaking sound - allows precise adjustment of detector for a particular installation location - powered by single 6LR61 alkaline battery..

Transformer 230 V/18 AC, 40 VA for OPU-3 P..

Wireless two-channel 230 V AC in-wall controller. The ASW-210 module is designed to remotely switch on/off devices powered from 230 V AC mains. It operates as part of the Satel ABAX 2/ABAX two-way wireless system...

The MTX-300 controller enables expansion of the alarm systems by adding wireless devices that operate at 433 MHz frequency. It can work in conjunction with SATEL control panels, including: INTEGRA, INTEGRA Plus, VERSA and VERSA Plus, as well as MICRA module. It can also be used in any third-party alarm system or automation system, e.g. as a radio c..

The VERSA-MCU module enables expansion of the VERSA control panels with wireless 433MHz detectors. Up to 30 detectors may be added to a VERSA panel using this module. Owing to its compact casing, the VERSA-MCU module may be easily installed in an optimum location. - supports up to 30 MICRA system detectors - supports 433 MHz pilots - dedicated for ..

ACU-220 uses the 868 MHz radio band, in which 4 channels have been allocated. Communication between components of the ABAX 2 system is encrypted (AES standard) and two-way, all transmissions being acknowledged. The controller works together with the INTEGRA, INTEGRA Plus and VERSA control panels (connection via communication bus), making expansion ..

ABAX 2 wireless system controller ACU-280 provides two-way, encrypted (AES standard) communication in the 868 MHz band - all radio transmissions between components of the ABAX 2 system are acknowledged. It works together with the INTEGRA, INTEGRA Plus and VERSA control panels, enabling wireless devices to be added to the alarm system. Because of i..

ARU-200 radio signal retransmitter receives transmissions from ABAX 2 wireless devices and retransmits them. ARU-200 can extend the range of the ABAX 2 system wireless communication...

The MRU-300 radio signal repeater receives transmissions from MICRA wireless devices and retransmits them. It works with the PERFECTA control panels (WRL models), VERSA-MCU controller, MTX-300 controller, MICRA alarm module (firmware version 2.02 or newer). - support for the following MICRA wireless system devices: -- MFD-300, MGD-300, MMD-300,..

Zone and output expansion module - support for: NO, NC EOL, 2EOL/NO, 2EOL/NC (alarm control panels only) 3EOL (INTEGRA Plus only) - support for roller shutter and vibration detectors (alarm control panels only) - system expansion with 8 zones - system expansion with 8 outputs: 4 OC type outputs 4 relay outputs - ability to connect..

The ACX-210 module makes it possible to use wired devices (detectors, sirens, etc.) in the ABAX 2/ABAX wireless system. It has 4 programmable zones with support for the NO and NC type wire detectors and EOL, 2 EOL configurations, as well as 4 programmable OC type wired outputs. ACX-210 settings are configured and its firmware updated remotely. In ..

The ACX-220 module enables wired devices (detectors, sirens, etc.) to be used in the ABAX 2/ABAX wireless system. It has 4 programmable zones with support for the NO and NC type wire detectors and EOL, 2 EOL configurations, as well as 4 programmable relay outputs. Configuration of settings and updating of firmware of ACX-220 are carried out remote..