Earth inspection box 280x280x180 mm Features: Inspection box for grounding systems, designed to withstand loads of up to 5,000 kg. Made from high-quality resin, it ensures safety, durability, and long service life. The chamber is installed flush below ground level, and the lid with a special opening allows for easy lifting and quick access. ..

Copper Clad Steel Ground Rod, Pointed, 20mm x 1.5m Features: Copper clad steel earth rod, 20mm diameter, 150cm long, onepointed end, two threaded ends, pure copper layer thickness: 254 microns. Both threaded ends are compatible with screw standard M22. For use in grounding and lightning systems. Specifications: Material: copper clad steel. Copp..

Copper Clad Steel Ground Rod, Pointed, 16mm x 1.5m Features: Copper clad steel earth rod, 16mm diameter, 150cm long, onepointed end, two threaded ends, pure copper layer thickness: 254 microns. Both threaded ends are compatible with screw standard M18. For use in grounding and lightning systems. Specifications: Material: copper clad ste..

Plug for electric car Type 1, 32A. The electric car plug is designed to create a custom EV charger by selecting the desired cable length and connectors. Specifications: Plug type: SAE J1772, Type 1 (Japan / US standard), Yazaki. Rated current: 32A or 16A. Rated voltage: 250V AC. Maximum charging power 7.4 kW. Number of contacts: 5pins. Sa..

Portable charger for electric cars, with GB/T plug, 6-16A, 3.5kW, single-phase, with LED screen and 2 touch buttons, with 5m cable. Features: The portable charger allows you to charge electric cars from the AC network with a power of up to 3.5 kW. GB/T electric car connector (Chinese standard) and Schuko plug. 5 meter long charging cable. LED disp..

Portable charger for electric cars, with Type 1 plug, 6-16A, max 3.5kW, single-phase, with LED screen and 2 touch buttons, with 5m cable. Features: The portable charger allows you to charge electric cars from the AC network with a power of up to 3.5 kW. Type 1 EV connector (US/Japan standard) and Schuko plug. 5 meter long charging cable. LED displ..

Portable EV charger with plug, Type 2-CEE blue, 6-32A, 7.2kW, 1-phase, 5m. Features: 5 meter long charger for electric cars. 1-phase design and 32A current allows charging electric cars with a power of up to 7.2kW. Type 2 EV connector (European standard); and CEE blue plug with safety class IP44 (adapted to outdoor conditions) is suitable for the..

Charging station for electric cars Mode3, 22kW, 32A, 3-phase, with Type 2 connector, without charging cable, wallbox, RCD, IP65 (for indoor and outdoor conditions), IK08. Features: The charging station allows charging up to 22kW. Type 2 connector, European standard. Compatible with any vehicle using an appropriate cable or adapter (Type 1 Yaz..

Charging station for electric cars Mode3, 22kW, 32A, 3-phase, with Type 2 connector, wallbox, RCD, IP65 (for indoor and outdoor conditions), with 5m lenght charging cable. Features: The charging station allows charging up to 22kW. 5 meter long charging cable for electric cars. Type 2 connector, European standard. Compatible with any vehicle ..

Portable EV charger, connector Type 1-CEE blue, 6-32A, 7.2kW, 1-phase, 5m. Features: 5 meter long charging cable for electric cars. 1-phase design and 32A current allows charging electric cars with a power of up to 7.2kW. Type 1 EV connector (US/Japan standard); and CEE blue plug with safety class IP44 (adapted to outdoor conditions) is suit..

Electric vehicle charging socket Type 2, Male, 16A, 240V, 1 phase. Made with a high quality insulating thermoplastic coating that provides IP54 protection against dust and water ingress from all sides and has a water drainage hole. The socket is ready for 4-point fixing and the screw end is wire-type. The socket is equipped with resistance sensors ..

Electric vehicle charging socket Type 2, Male, 32A, 415V, 3-phase. Made with a high quality insulating thermoplastic coating that provides IP54 protection against dust and water ingress from all sides and has a water drainage hole. The socket is ready for 4-point fixing and the screw end is wire-type. The socket is equipped with resistance sensors ..

Electromagnetic lock with 180kg x2. holding force. Specifications: Working voltage: 12VDC. Operating current: 0.35A. Holding force: 180kg x2. Operating temperature: -25-60°C. Operating humidity: 10%-90%RH. Dimensions: 348x41x23mm. Material: aluminium alloy, stainless steel. Applicability: glass, wooden, steel doors...

Electromagnetic lock with 280kg. holding force. Specifications: Working voltage: 12VDC. Operating current: 0.45A. Holding force: 280kg. Operating temperature: -25-60°C. Operating humidity: 10%-90%RH. Dimensions: 261x48x29mm. Material: aluminium alloy, stainless steel. Applicability: sliding door...

Electromagnetic lock with 350kg. holding force. Specifications: Working voltage: 12VDC. Operating current: 0.45A. Holding force: 350kg. Operating temperature: -25-60°C. Operating humidity: 10%-90%RH. Dimensions: 269x48x29mm. Material: aluminium alloy, stainless steel. Applicability: sliding door...