The ETH-SP is engineered to protect any Power‑over‑Ethernet (PoE) or non‑PoE device with connection speeds of up to 1 Gbps...

MIKROTIK GESP New revision of Gigabit Ethernet Surge Protector in IP67 waterproof enclosure GESP is Gigabit Ethernet Surge Protector that can be used to protect the network from lightning or surge damages. Here’s what a typical use-case would be like. You have a mast with some antennas. And some switches on the ground. Put the GESP surge protecto..

GESP+POE-IN GESP+PoE is a passive PoE injector with surge protection. Combine it with the GESP devices for maximum security and peace of mind...

..

UBIQUITI PoE Adapter (15W) An adapter that can power UniFi PoE devices, reduce dependency on PoE switch power, and provide a Gigabit LAN connection. + Delivers up to 15W of PoE + Surge, peak pulse, and overcurrent protection + Contains RJ45 data input, AC cable with earth ground, and PoE output + LED indicator for status monitoring..

The new MikroTik Gigabit PoE adapter for powering any RouterBOARD over Gigabit Ethernet. Simply connect your power source and then use an ethernet cable to connect the injector to the RouterBOARD device. Helps reducing number of wires that lead up the tower. For using with any RouterBOARD that supports 9-48V PoE. The GPOE has shielded connectors...

"Single-Port Long Reach Ethernet over Coax Extender > Supports IEEE802.3, IEEE802.3u standards.  > Support data line (1, 2, 3, 6) PoE power supply.  > Port: 1*RJ45 10/100Mbps, 1*BNC.  > Supports RG59 coaxial cable: 400m/100Mbps,1000m/10Mbps.  > Supports MDI/MDIX self-adaption.  > Supports long range power supply transmission via coaxial cable. "..

Support passive PoE cascade power supply and Ethernet data exchange Support IEEE 802.3af/at standard power supply IP Camera Cooperating with High PoE Midspan (TAM01GT01GT-75W), able to cascade level 2 PoE Extender, connect to 3 IPC (power consumption..

..

PoE Adapters are highly reliable, and when used with Ubiquiti TOUGHCable, they provide earth grounding and surge protection to help protect against electrostatic discharge (ESD) events. - POE-48-24W-G has a Gigabit LAN port - 48VDC @ 0.5A Ubiquiti PoE Adapters provide a variety of features to help protect your PoE devices: • Surge protection • Cl..

The GPEN11 is a power injector that can be mounted on a wall, and will power your uplink devices with PoE power. The GPEN11 is part of the GPEN (Gigabit Passive Ethernet Network) concept, which aims to replace GPON installations with lower cost and more easy to deploy ethernet alternative.   The MikroTik GPEN11 is a wall-mountable power injector de..

GPEN21 Smart power injector that serves as an advanced software controlled repeater The GPEN21 is a smart power injector that serves as an advanced software controlled repeater. Not only can it power your uplink devices via PoE, it can also provide a range of useful software features: • Interface management and monitoring • GPEN link fault detect..

..

..

The PoE Injector TL-POE150S fully complies with IEEE 802.3af standard, and can work with all IEEE 802.3af PoE compliant PDs (Powered Devices) or PoE Receiver Adapters, such as TP-LINK’s TL-POE10R, or other equivalent product, to expand your network to where there are no power line or outlet, where you wish to fix device such as AP, IP Camera or IP ..